LCD Error Messages

Error 01: Throttle Abnormality [Solution: Check for loose throttle wires. New throttle may be needed]
Error 03: Motor Hall Signal Abnormality [Solution: Check for loose throttle wires. New motor and/or controller may be needed]
Error 06: Motor or controller has short circuit Abnormality [Solution: Check for loose throttle wires. New motor and/or controller may be needed]

Swapping Rear Wheel+Motor

To swap the rear motor…
Step 1
Open the controller box.

Step 2
Disconnect the motor line from within the controller box.

Step 3
Remove the chain from the rear wheel

Step 4
Unscrew the rear axel

Step 5
Pull out the rear wheel from the bike.

Step 6
Replace with your new rear wheel by following these instructions in reverse.